Water-jacketed batch fat melting tanks for cocoa butter, palm oil, shea butter, coconut oil, and other fat-based input.
Price
4,500 - 19,000 EUR
Machine overview
Water-jacketed batch fat melting tanks for cocoa butter, palm oil, shea butter, coconut oil, and other fat-based input. Selection begins with input format. No-grid build includes FMT50, FMT100, and FMT200 on 220 V single-phase, for drops, chips, or pre-cut input, with a 50–200 L range. Grid build includes FMT300, FMT500, FMT500INS, and FMT1000INS on 380 V three-phase, for whole blocks placed on a hot-water grid, with a 300–1000 L range. FMT500INS and FMT1000INS add glass wool insulation that FMT300 and FMT500 do not have. Typical refining-line position is upstream of the pre-mixer and ball mill refiner. 50–1000 L.
Technical data
| Category | Preparation |
|---|---|
| Model range | 7 models |
| Price | 4,500 - 19,000 EUR |
| Capacity | 50 L - 1000 L |
| Electrical supply | 220 V single-phase, 700 W - 380 V three-phase, 7.3 k... |
| Process time | Approximately 90 minutes for drops, chips, or pre-cu... |
| Material | Food-contact stainless steel / AISI 304 stainless st... |
| Process | Preparation |
Compare available models
Review each model with its own image and specification table.
Model range
Choose a model by capacity, electrical supply and required configuration.
| Model | Fat Melting Tank FMT50 (No-Grid Tabletop) |
|---|---|
| Tank type | Rectangular reservoir; tabletop fat melter |
| Melting system | No melting grid — heat from water jacket only |
| Accepted input | Drops, chips, pre-cut, or whole-block input; one block fits |
| Typical melt time | Approximately 90 minutes for drops, chips, or pre-cut input; longer for whole uncut blocks |
| Material | AISI 304 stainless steel |
| Heating type | Water jacket with PID-controlled heating element |
| Insulation | Glass wool around the rectangular reservoir. Limits heat exchange with the room and lowers heater duty cycle. |
| Mobility | On casters |
| Pump integration | Not available — manual or gravity transfer only |
| Loading capacity | 50 L |
| Electrical supply | 220 V single-phase, 700 W |
| Model | FMT50 |
| Model | Fat Melting Tank FMT100 (No-Grid) |
|---|---|
| Tank type | Rectangular reservoir fat melter |
| Melting system | No melting grid — heat from water jacket only |
| Accepted input | Drops, chips, pre-cut, or whole-block input; two blocks fit |
| Typical melt time | Approximately 90 minutes for drops, chips, or pre-cut input; longer for whole uncut blocks |
| Material | AISI 304 stainless steel |
| Heating type | Water jacket with PID-controlled heating element |
| Insulation | Glass wool around the rectangular reservoir. Limits heat exchange with the room and lowers heater duty cycle. |
| Mobility | On casters |
| Pump integration | Not available — manual or gravity transfer only |
| Loading capacity | 100 L |
| Electrical supply | 220 V single-phase, 1000 W |
| Model | FMT100 |
| Model | Fat Melting Tank FMT200 (No-Grid) |
|---|---|
| Tank type | Rectangular reservoir fat melter |
| Melting system | No melting grid — heat from water jacket only |
| Accepted input | Drops, chips, pre-cut, or whole-block input; four blocks fit |
| Typical melt time | Approximately 90 minutes for drops, chips, or pre-cut input; longer for whole uncut blocks |
| Material | AISI 304 stainless steel |
| Heating type | Water jacket with PID-controlled heating element |
| Insulation | Glass wool around the rectangular reservoir. Limits heat exchange with the room and lowers heater duty cycle. |
| Mobility | On casters |
| Pump integration | Not available — manual or gravity transfer only |
| Loading capacity | 200 L |
| Electrical supply | 220 V single-phase, 1500 W |
| Model | FMT200 |
| Model | Fat Melting Tank FMT300 (Melting Grid) |
|---|---|
| Tank type | Rectangular reservoir fat melter |
| Melting system | Hot-water circulation melting grid |
| Accepted input | Whole fat blocks placed directly on the grid; four blocks fit |
| Typical melt time | Approximately 50 minutes |
| Material | AISI 304 stainless steel |
| Heating type | Water jacket with PID-controlled heating element |
| Insulation | Not insulated — for insulated configuration choose FMT500INS or FMT1000INS |
| Lid | Vertically opening top lid with gas springs |
| Grid configuration | Rotatable grid (optional, not compatible with agitation) OR fixed grid with optional pneumatic oscillating agitation (not compatible with rotatable grid) |
| Pump integration | Optional fat transfer pump |
| Transfer control | Optional load cells (weight-based) or flowmeter (volume-based, requires pump) |
| Loading capacity | 300 L |
| Electrical supply | 380 V three-phase, 6 kW (no single-phase configuration) |
| Model | FMT300 |
| Model | Fat Melting Tank FMT500 (Melting Grid) |
|---|---|
| Tank type | Rectangular reservoir fat melter |
| Melting system | Hot-water circulation melting grid |
| Accepted input | Whole fat blocks placed directly on the grid; six blocks fit |
| Typical melt time | Approximately 50 minutes |
| Material | AISI 304 stainless steel |
| Heating type | Water jacket with PID-controlled heating element |
| Insulation | Not insulated — for insulated configuration choose FMT500INS |
| Lid | Vertically opening top lid with gas springs |
| Grid configuration | Rotatable grid (optional, not compatible with agitation) OR fixed grid with optional pneumatic oscillating agitation (not compatible with rotatable grid) |
| Pump integration | Optional fat transfer pump |
| Transfer control | Optional load cells (weight-based) or flowmeter (volume-based, requires pump) |
| Loading capacity | 500 L |
| Electrical supply | 380 V three-phase, 6 kW (no single-phase configuration) |
| Model | FMT500 |
| Model | Insulated Fat Melter FMT500INS (Melting Grid) |
|---|---|
| Tank type | Insulated rectangular reservoir fat melter |
| Melting system | Hot-water circulation melting grid |
| Accepted input | Whole fat blocks placed directly on the grid; six blocks fit |
| Typical melt time | Approximately 50 minutes |
| Material | AISI 304 stainless steel |
| Insulation | Glass wool insulation around the water jacket. Heater duty cycle drops during continuous operation, reducing energy consumption and waste heat. |
| Heating type | Water jacket with PID-controlled heating element |
| Lid | Top lid with gas springs |
| Agitation option | Optional pneumatic agitation for mixtures containing suspended solids |
| Pump integration | Optional fat transfer pump |
| Transfer control | Optional load cells (weight-based) or flowmeter (volume-based, requires pump) |
| Loading capacity | 500 L |
| Electrical supply | 380 V three-phase, 7.3 kW (no single-phase configuration) |
| Model | FMT500INS |
| Model | Insulated Fat Melter FMT1000INS (Melting Grid) |
|---|---|
| Tank type | Insulated rectangular reservoir fat melter |
| Melting system | Hot-water circulation melting grid |
| Accepted input | Whole fat blocks placed directly on the grid; twelve blocks fit |
| Typical melt time | Approximately 50 minutes |
| Material | AISI 304 stainless steel |
| Insulation | Glass wool insulation around the water jacket. Heater duty cycle drops during continuous operation, reducing energy consumption and waste heat. |
| Heating type | Water jacket with PID-controlled heating element |
| Lid | Top lid with gas springs |
| Agitation option | Optional pneumatic agitation for mixtures containing suspended solids |
| Pump integration | Optional fat transfer pump |
| Transfer control | Optional load cells (weight-based) or flowmeter (volume-based, requires pump). Load cells transfer a target weight per cycle. |
| Loading capacity | 1000 L |
| Electrical supply | 380 V three-phase, 7.3 kW (no single-phase configuration) |
| Model | FMT1000INS |
Batch chocolate ball mills for pumpable chocolate mass and other fat-based mixtures.
Price
6,500 EUR
CHE500 scraped-surface heat exchanger reheats bypass-return chocolate from ~30 °C to tank temperature ~45...
Price
Custom quote
Water-jacketed industrial chocolate melting tanks that melt solid chocolate and hold it at workable tempe...
Price
11,000 EUR
Seven chocolate holding tank models, 100 to 3000 kg.
Price
11,000 EUR
